|1.||Roughen the surfaces to be joined or repaired with sandpaper. Ensure ssurfaces are clean & dry, free from dirt, oil moisture,rust.|
|2.||Remove cap. Pierce the end of tube with point on cap. Be careful to avoid spilling of adhesive when piercing. Squeeze equal amount of Resin & Hardener onto a clean surface. Mix thoroughly. Mix ratio:1:1. Wrong ratio or unequal mixing may result in bad hardness.|
|3.||Finish the whole operation within 3 minutes. Solidify in 4 minutes. Full bond strength is reached after 6 hours. When the temperature below 10C, the hardening time is longer.|
|Min.Order Quantity：||1000 box / boxes|
|Usage：||Rhinestone/ Wardrobe/ Ceramics/ Glass|
|Curing time：||5 minutes|
|OEM / ODM：||Acceptable|
|Place Of Origin：||Taiwan|
|Port：||Keelung Port, Taiwan|
|Certification：||SGS / ISO / TUV / MSDS / SonCAP / ROHS|
|Packaging Details：||20 set/ inner box
10 inner boxes/ CTN.
We also can do the packing as your designs and requirements.