Specification
AB Glue Two In One Syringe-Clear
Card packing/ set
Packing
20 set/ inner box
10 inner boxes/ CTN.
A-Resin 12g
B-Hardener 12g
AB Glue Two In One Syringe-Clear
Card packing/ set
20 set/ inner box
10 inner boxes/ CTN.
A-Resin 12g
B-Hardener 12g
| 1. | Roughen the surfaces to be joined or repaired with sandpaper. Ensure ssurfaces are clean & dry, free from dirt, oil moisture,rust. |
| 2. | Remove cap. Pierce the end of tube with point on cap. Be careful to avoid spilling of adhesive when piercing. Squeeze equal amount of Resin & Hardener onto a clean surface. Mix thoroughly. Mix ratio:1:1. Wrong ratio or unequal mixing may result in bad hardness. |
| 3. | Finish the whole operation within 3 minutes. Solidify in 4 minutes. Full bond strength is reached after 6 hours. When the temperature below 10C, the hardening time is longer. |