| Image |
Title |
Date |
 |
SC317-21 RTV Silicone -Clear
1.Surface must be clean and dry. Remove all dirt, oil, grease, detergents and loose material.2.Simply remove cap, puncture inner seal, attach nozzle, trim tip and apply by pushing sealant ahead of the
|
2024-11-18 |
 |
SC317-22 RTV Silicone -Red
1.Remove old gasket material from surfaces thoroughly.2.Clean surface with residue-free solvent and allow surface to dry.3.Cut nozzle to desired size.4.Squeeze tube to form a continuous and even bead
|
2024-11-18 |
 |
SC317-23 RTV Silicone -Black
1.Remove old gasket material from surfaces thoroughly.2.Clean surface with residue-free solvent and allow surface to dry.3.Cut nozzle to desired size.4.Squeeze tube to form a continuous and even bead
|
2024-11-18 |
 |
SC317-24 RTV Silicone -Gray
1.Remove old gasket material from surfaces thoroughly.2.Clean surface with residue-free solvent and allow surface to dry.3.Cut nozzle to desired size.4.Squeeze tube to form a continuous and even bead
|
2024-11-18 |
 |
SC317-25 RTV Silicone -Blue
1.Surface must be clean and dry. Remove all dirt, oil, grease, detergents and loose material.2.Simply remove cap, puncture inner seal, attach nozzle, trim tip and apply by pushing sealant ahead of the
|
2024-11-18 |
 |
SA170-01 Strong Adhesive (170ml)
1.Tube must be pierced before using! Remove outer cap. Do not squeeze tube while puncturing with cap. 2. Point away from face and body. Apply plaster on both surfaces to be bonded evenly. Wait 20 to 3
|
2024-11-18 |
 |
SA220-01 Strong Adhesive (30ml)
1.Tube must be pierced before using! Remove outer cap. Do not squeeze tube while puncturing with cap. 2. Point away from face and body. Apply plaster on both surfaces to be bonded evenly. Wait 20 to 3
|
2024-11-18 |
 |
SA250-01 Strong Adhesive (250ml)
1.Tube must be pierced before using! Remove outer cap. Do not squeeze tube while puncturing with cap.2.Point away from face and body. Apply plaster on both surfaces to be bonded evenly. Wait 20 to 30
|
2024-11-18 |
News