| Image |
Title |
Date |
 |
SC317-36 RTV Silicone -White
1.Surface must be clean and dry. Remove all dirt, oil, grease, detergents and loose material.2.Simply remove cap, puncture inner seal, attach nozzle, trim tip and apply by pushing sealant ahead of the
|
2024-11-18 |
 |
SC317-41 RTV Silicone Squeezer version-Clear
1.Surface must be clean and dry. Remove all dirt, oil, grease, detergents and loose material.2.Simply remove cap, puncture inner seal, attach nozzle, trim tip and apply by pushing sealant ahead of the
|
2024-11-18 |
 |
SC317-42 RTV Silicone Squeezer version-Red
1.Remove old gasket material from surfaces thoroughly.2.Clean surface with residue-free solvent and allow surface to dry.3.Cut nozzle to desired size.4.Squeeze tube to form a continuous and even bead
|
2024-11-18 |
 |
SC317-43 RTV Silicone Squeezer version-Black
1.Remove old gasket material from surfaces thoroughly.2.Clean surface with residue-free solvent and allow surface to dry.3.Cut nozzle to desired size.4.Squeeze tube to form a continuous and even bead
|
2024-11-18 |
 |
SC317-44 RTV Silicone Squeezer version-Gray
1.Remove old gasket material from surfaces thoroughly.2.Clean surface with residue-free solvent and allow surface to dry.3.Cut nozzle to desired size.4.Squeeze tube to form a continuous and even bead
|
2024-11-18 |
 |
SC317-45 RTV Silicone Squeezer version-Blue
1.Remove old gasket material from surfaces thoroughly.2.Clean surface with residue-free solvent and allow surface to dry.3.Cut nozzle to desired size.4.Squeeze tube to form a continuous and even bead
|
2024-11-18 |
 |
SC317-46 RTV Silicone Squeezer version-White
1.Remove old gasket material from surfaces thoroughly.2.Clean surface with residue-free solvent and allow surface to dry.3.Cut nozzle to desired size.4.Squeeze tube to form a continuous and even bead
|
2024-11-18 |
 |
TCAR-02A Tire Repair Kit for Car ＆ Moto (CO2 repair kit bag box)
1.Before set up, make sure the switch is in the closed position, place the adapter on the inflator.2.Smaller hole attach CO2 at the bottom in clockwise direction.3.Attach the pipe to the tire and turn
|
2024-11-18 |
News