| Image |
Title |
Date |
 |
SC317-04 RTV Silicone -Gray
1.Remove old gasket material from surfaces thoroughly.2.Clean surface with residue-free solvent and allow surface to dry.3.Cut nozzle to desired size.4.Squeeze tube to form a continuous and even bead
|
2024-11-18 |
 |
SC250-01 RTV Silicone
1.Surface must be clean and dry. Remove all dirt, oil, grease, detergents and loose material.2. Simply remove cap, puncture inner seal, attach nozzle, trim tip and apply by pushing sealant ahead of th
|
2024-11-18 |
 |
RS135-02 Rubber Solution
1.Rub off the part to be mended larger then the patch in size.2. Apply slight rubber solution to the part to be mended.3. Slowly take off the foil.4.When the rubber solution dries, paste the patch on
|
2024-11-18 |
 |
RS190-04 Rubber Solution
1.Rub off the part to be mended larger then the patch in size.2. Apply slight rubber solution to the part to be mended.3. Slowly take off the foil.4.When the rubber solution dries, paste the patch on
|
2024-11-18 |
 |
RS190-01A Rubber Solution
1.Rub off the part to be mended larger then the patch in size.2. Apply slight rubber solution to the part to be mended.3. Slowly take off the foil.4.When the rubber solution dries, paste the patch on
|
2024-11-18 |
 |
RS190-02 Rubber Solution
1.Rub off the part to be mended larger then the patch in size.2. Apply slight rubber solution to the part to be mended.3. Slowly take off the foil.4.When the rubber solution dries, paste the patch on
|
2024-11-18 |
 |
RS190-03 Rubber Solution
1.Rub off the part to be mended larger then the patch in size.2. Apply slight rubber solution to the part to be mended.3. Slowly take off the foil.4.When the rubber solution dries, paste the patch on
|
2024-11-18 |
 |
RS135-01 Rubber Solution
1.Rub off the part to be mended larger then the patch in size.2. Apply slight rubber solution to the part to be mended.3. Slowly take off the foil.4.When the rubber solution dries, paste the patch on
|
2024-11-18 |
News