Back|Member|Save|Mobile

Kronyo United Co., Ltd. 冠佑聯合有限公司

Export & Import business , Synthetic Rubber Manufacture ,...

News
Products type
Search
 
Link
Image list | Text list Products
Image Title Date
TPK-34 Super tire sealant kit
1.Raising the tire first then pulled out the nail. (do mark)2.Place valve at 5-7 oclock position and remove valve cap and core.3.Pour sealant into tire from tire valve.4.Turn tight tire valve core and
2024-04-12
TCAR-74 Tire Repair Kit for Car & Moto
1.Pull out the nail from tire. 2. Clean the injury with the open end inserting tool.Following the direction of the injury and twist. 3. Times in hole inside. 4.Feed the seal string to open end inserti
2024-04-12
TCAR-75 Tire Repair Kit for Car & Moto
1.Pull out the nail from tire. 2. Clean the injury with the open end inserting tool.Following the direction of the injury and twist. 3. Times in hole inside. 4.Feed the seal string to open end inserti
2024-04-12
TSL-10E Tire seal- Flat 10cm (Gray)
1.Pull out the nail from tire. 2. Clean the injury with the open end inserting tool.Following the direction of the injury and twist. 3. Times in hole inside. 4.Feed the seal string to open end inserti
2024-04-12
TS08-01 Rubber Solution & 10cm Flat Tire seal(Gray)
1.Pull out the nail from tire. 2. Clean the injury with the open end inserting tool.Following the direction of the injury and twist. 3. Times in hole inside. 4.Feed the seal string to open end inserti
2024-04-12
TPK-43 Car tire sealant kit (350ml)
1.Raising the tire first then pulled out the nail. (do mark)2.Place valve at 5-7 oclock position and remove valve cap and core.3.Pour sealant into tire from tire valve.4.Turn tight tire valve core and
2024-04-12
TCAR-09 Tire Repair Kit for Car & Moto
1.Before set up, make sure the switch is in the closed position, place the adapter on the inflator.2.Smaller hole attach CO2 at the bottom in clockwise direction.3.Attach the pipe to the tire and turn
2024-04-12
TCAR-06C Tire Repair Kit for Car & Moto (PVC CO2 repair kit bag)
1.Before set up, make sure the switch is in the closed position, place the adapter on the inflator.2.Smaller hole attach CO2 at the bottom in clockwise direction.3.Attach the pipe to the tire and turn
2024-04-12
   Home   Next   Prev   Last